18. Boom

 

18. ブーム

 
(a)A metal sleeve supplied by the builder of maximum length 900 mm may be fixed inside the boom.   (a)ブームの中に、ビルダーから供給される最大長 900mm の金属製スリーブを 1本取り付けてもよい。 
 The sleeve shall not extend aft of the point 1220 mm from the front end of the boom (including plug).    スリーブの後端は、ブーム前端(グースネックプラグを含む)から 1220mm の点を超えてはならない。 
 
(b)The stainless steel mainsheet eye strap between the two blocks on the boom may be replaced with a soft strap.   (b)ブームの 2個のブロックの間にあるステンレス製メインシートアイストラップは、ソフトストラップに交換してもよい。 
 The maximum width of the soft strap shall be 26 mm.    ソフトストラップの最大幅は 26mm とする。 
 The soft strap shall only be fixed to the boom using the holes drilled by the builder as shown in the diagram below.    ソフトストラップは、ビルダーによって開けられた穴のみを使って、下図のとおりにブームに固定されなければならない。 
  soft strap
ソフトストラップ部の断面。規則に適合した固定方法のみを示す。

方式1: リベット 1本式:
ソフトストラップは (任意で)縫って輪にしてもよい。

方式2: リベット 2本式:
ソフトストラップは縫って輪にする。

方式3: リベット 2本式:
短いソフトストラップを使用。
 
    注:
  1.  * で示す 15mm の距離は公称値。
  2.  方式 2 と 3 の穴はもともとのステンレス製アイストラップの取付穴。
  3.  ブームには、ブームストラップの位置に 3つの穴を開けてはならない。
 
 
(c)Traveller and Boom mounted mainsheet blocks may be replaced with the “Builder Supplied” blocks shown in the photo.   (c)トラベラーとブームに取り付けられているメインシートブロックは、写真に示されている「ビルダー供給の」ブロックに交換してもよい。 
 mainsheet blocks
ILCA By-Law 1: Rules  クラス規則2018